diff --git a/docs/content/getting-started/install-traefik.md b/docs/content/getting-started/install-traefik.md
index 15aa3733a..dfc592b81 100644
--- a/docs/content/getting-started/install-traefik.md
+++ b/docs/content/getting-started/install-traefik.md
@@ -44,10 +44,10 @@ Traefik can be installed in Kubernetes using the Helm chart from <https://github
 
 Ensure that the following requirements are met:
 
-* Kubernetes 1.14+
-* Helm version 3.x is [installed](https://helm.sh/docs/intro/install/)
+* Kubernetes 1.16+
+* Helm version 3.9+ is [installed](https://helm.sh/docs/intro/install/)
 
-Add Traefik's chart repository to Helm:
+Add Traefik Labs chart repository to Helm:
 
 ```bash
 helm repo add traefik https://traefik.github.io/charts
@@ -68,6 +68,9 @@ helm install traefik traefik/traefik
 !!! tip "Helm Features"
 
     All [Helm features](https://helm.sh/docs/intro/using_helm/) are supported.
+
+    Examples are provided [here](https://github.com/traefik/traefik-helm-chart/blob/master/EXAMPLES.md). 
+
     For instance, installing the chart in a dedicated namespace:
 
     ```bash tab="Install in a Dedicated Namespace"
@@ -83,8 +86,7 @@ helm install traefik traefik/traefik
     as with [any helm chart](https://helm.sh/docs/intro/using_helm/#customizing-the-chart-before-installing).
     {: #helm-custom-values }
 
-    The values are not (yet) documented, but are self-explanatory:
-    you can look at the [default `values.yaml`](https://github.com/traefik/traefik-helm-chart/blob/master/traefik/values.yaml) file to explore possibilities.
+    All parameters are documented in the default [`values.yaml`](https://github.com/traefik/traefik-helm-chart/blob/master/traefik/values.yaml).
 
     You can also set Traefik command line flags using `additionalArguments`.
     Example of installation with logging set to `DEBUG`:
diff --git a/docs/content/getting-started/quick-start.md b/docs/content/getting-started/quick-start.md
index 5bddfc2ae..6a411666e 100644
--- a/docs/content/getting-started/quick-start.md
+++ b/docs/content/getting-started/quick-start.md
@@ -50,7 +50,12 @@ Now that we have a Traefik instance up and running, we will deploy new services.
 Edit your `docker-compose.yml` file and add the following at the end of your file.
 
 ```yaml
-# ...
+version: '3'
+
+services:
+
+  ...
+
   whoami:
     # A container that exposes an API to show its IP address
     image: traefik/whoami
diff --git a/docs/content/traefik-hub/index.md b/docs/content/traefik-hub/index.md
index f1c46035d..a6c57cee9 100644
--- a/docs/content/traefik-hub/index.md
+++ b/docs/content/traefik-hub/index.md
@@ -29,6 +29,12 @@ This agent can:
     * The Traefik Hub Agent must be installed to connect to the Traefik Hub platform.
     * Activate this feature in the experimental section of the static configuration.
 
+!!! information "Configuration Discovery"
+
+    According to installation options, the Traefik Hub Agent listens to the Docker or Kubernetes API to discover containers/services.
+
+    It doesn't support the routers discovered by Traefik Proxy using other providers, e.g., using the File provider.
+
 !!! example "Minimal Static Configuration to Activate Traefik Hub for Docker"
 
     ```yaml tab="File (YAML)"
diff --git a/docs/content/user-guides/docker-compose/basic-example/index.md b/docs/content/user-guides/docker-compose/basic-example/index.md
index 643df4505..bda9ccca6 100644
--- a/docs/content/user-guides/docker-compose/basic-example/index.md
+++ b/docs/content/user-guides/docker-compose/basic-example/index.md
@@ -16,6 +16,35 @@ This will also be used as a starting point for the other docker-compose guides.
 --8<-- "content/user-guides/docker-compose/basic-example/docker-compose.yml"
 ```
 
+??? Networking
+
+    The Traefik container has to be attached to the same network as the containers to be exposed.
+    If no networks are specified in the docker-compose file, Docker creates a default one that allows Traefik to reach the containers defined in the same file.
+    You can [customize the network](https://docs.docker.com/compose/networking/#specify-custom-networks) as described in the example below.
+    You can use a [pre-existing network](https://docs.docker.com/compose/networking/#use-a-pre-existing-network) too.
+
+    ```yaml
+    version: "3.3"
+
+    networks:
+      traefiknet: {}
+
+    services:
+
+      traefik:
+        image: "traefik:v2.9"
+        ...
+        networks:
+          - traefiknet
+
+      whoami:
+        image: "traefik/whoami"
+        ...
+        networks:
+          - traefiknet
+
+    ```
+
 - Replace `whoami.localhost` by your **own domain** within the `traefik.http.routers.whoami.rule` label of the `whoami` service.
 - Run `docker-compose up -d` within the folder where you created the previous file.
 - Wait a bit and visit `http://your_own_domain` to confirm everything went fine.
diff --git a/integration/fixtures/simple_debug_log.toml b/integration/fixtures/simple_debug_log.toml
new file mode 100644
index 000000000..5f6419a52
--- /dev/null
+++ b/integration/fixtures/simple_debug_log.toml
@@ -0,0 +1,15 @@
+[global]
+  checkNewVersion = false
+  sendAnonymousUsage = false
+
+[log]
+  level = "DEBUG"
+
+[api]
+  insecure = true
+
+[providers.docker]
+
+[entryPoints]
+  [entryPoints.webHost]
+    address = ":8000"
diff --git a/integration/simple_test.go b/integration/simple_test.go
index 22327142f..41751d6a6 100644
--- a/integration/simple_test.go
+++ b/integration/simple_test.go
@@ -11,6 +11,7 @@ import (
 	"net/http"
 	"net/http/httptest"
 	"os"
+	"regexp"
 	"strings"
 	"sync/atomic"
 	"syscall"
@@ -1365,3 +1366,36 @@ func (s *SimpleSuite) TestMuxer(c *check.C) {
 		}
 	}
 }
+
+func (s *SimpleSuite) TestDebugLog(c *check.C) {
+	s.createComposeProject(c, "base")
+
+	s.composeUp(c)
+	defer s.composeDown(c)
+
+	file := s.adaptFile(c, "fixtures/simple_debug_log.toml", struct{}{})
+	defer os.Remove(file)
+
+	cmd, output := s.cmdTraefik(withConfigFile(file))
+
+	err := cmd.Start()
+	c.Assert(err, checker.IsNil)
+	defer s.killCmd(cmd)
+
+	err = try.GetRequest("http://127.0.0.1:8080/api/rawdata", 1*time.Second, try.BodyContains("PathPrefix(`/whoami`)"))
+	c.Assert(err, checker.IsNil)
+
+	req, err := http.NewRequest(http.MethodGet, "http://localhost:8000/whoami", http.NoBody)
+	c.Assert(err, checker.IsNil)
+	req.Header.Set("Autorization", "Bearer ThisIsABearerToken")
+
+	response, err := http.DefaultClient.Do(req)
+	c.Assert(err, checker.IsNil)
+	c.Assert(response.StatusCode, checker.Equals, http.StatusOK)
+
+	if regexp.MustCompile("ThisIsABearerToken").MatchReader(output) {
+		c.Logf("Traefik Logs: %s", output.String())
+		c.Log("Found Authorization Header in Traefik DEBUG logs")
+		c.Fail()
+	}
+}